Display parameters to Rotate with Model

[bryjarmoc]

Is there an option that I can put on so the Flagnotes, GD&T Callouts, Dimension, etc will rotate with the model?

 

[amatmay]

Hello,
Open the model, chose application drafting and dont select any sheet Or even if you have selected, switch back to model using "display sheet" from "format " pulldown menu.
Here u can add dimension and Flagnotes,etc...
and you can also rotate the model.

 

[bryjarmoc]

I apologize, I may not have been clear enough. I want the dimensions to stay facing forward while the model rotates. I am trying to capture the dimension for QA and when the model rotates I lose site of the dimension displays.

 

[bryjarmoc]

Can you set the dimensions in UG to "not" rotate with the model. In other words, when rotating the model the dimension callouts, flagnotes, gd&t notes, etc. are able to be read and continue facing forward.