Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Displayed part

Status
Not open for further replies.

sudhakarn

Automotive
Apr 1, 2013
506
Hi folks,
I am a new bie to NX.I want to understand the concept of displayed part in NX.Request your insights.
 
Replies continue below

Recommended for you

The Displayed Part is the one you see on the screen. Now in the case of an Assembly being the Displayed Part, it might NOT be the Work Part. The Work Part is the one that any additions or edits will be applied to. Now the Displayed Part and the Work Part could be the same if it's the Assembly that is the Work Part.

I hope this helps.

John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without
 
Hi Johnbraker,
Thanks a lot for your insights.Will check it out and get back if required.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor