Displaying Sheetmetal Bend Allowance Lines

[neiljones898]

Using Solidworks 2007. The Bend Allowance lines don't display. Is there a setting to get them to display?

 

[SBaugh]

Not exactly sure what you mean my Bend allowance lines won't display... but If your talking about where the bends is at then look under the Flat-Pattern feature. RMB "Flat Pattern" and edit the feature. There you can select what to see at the bend.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

"If it's not broke, Don't fix it!"

faq731-376

 

[JMirisola]

If you're in the drawing, see if sketches are turned on under 'View'.

Jeff Mirisola, CSWP

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M

 

[CorBlimeyLimey]

Have they displayed for you before and have now stopped?

If so, have you changed anything recently?

What video card and driver are you using?