Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Disposal of nickel catalyst after hydrogenation of edible oils.
- Thread starter toval
- Start date
Fatty ni catalyst waste can be burn to recover ash that contains nickel.
For this process to be of any economic value the ash should contain minimum 15 to 20% nickel and not more than 50% burn loss
What is the nickel content on as is basis? In other words what is the % loss in weight if material is incinerated and what is the ni content in the ash?
Koshik Patel
For this process to be of any economic value the ash should contain minimum 15 to 20% nickel and not more than 50% burn loss
What is the nickel content on as is basis? In other words what is the % loss in weight if material is incinerated and what is the ni content in the ash?
Koshik Patel
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question