Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Distance objective in healing
- Thread starter sudhakarn
- Start date
My understanding of the Healing command is it modifies both adjacent surfaces in order to make them continguous in C1,C2,C3. The distance is the maximum amount of deviation of the surfaces.
For example, if there are two planar surfaces with a small gap between them, and they cannot be Joined. Healing will eliminate the gap, but the surfaces will no longer be planar.
For example, if there are two planar surfaces with a small gap between them, and they cannot be Joined. Healing will eliminate the gap, but the surfaces will no longer be planar.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Question