Hello, anyone can help? I built chimney structure (maybe you know this as silo) with diameter 12 meter at bottom and 10 meter at top of chimney. At 35 meter elevation, it has a ring steel frame, i try to divide the frames that have an intersection but it's not working. Please help. Anyone knows why?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Divide Frame Intersection
- Thread starter fattahma7
- Start date
Jatfuentes
Structural
fattahma7,
May be you modeled yor "chimney", with Autocad, and is possible that there is an imprecition in your drawing, that means the frames that you want to divide are in different planes. Try to use a merge joints option or check your model.
May be you modeled yor "chimney", with Autocad, and is possible that there is an imprecition in your drawing, that means the frames that you want to divide are in different planes. Try to use a merge joints option or check your model.
precast123
Structural
Your frames aren't intersecting. Check your model. Redraw it. If its done in autocad correctly it should work too.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question