Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DL/LL ratio in Live Load Reduction Factor.

Status
Not open for further replies.
NewbieInSE

NewbieInSE

Structural
Dec 19, 2019
234
Hello Dear Engineers,

What does this account for? If it remains 1, then it seems that Live Load Reduction Factor is not applied to members (columns).

Thanks.

image_qn949f.png
 
Status
Not open for further replies.

Similar threads

Stockton2008
  • Locked
  • Question
How to set displacement ratio (storey drift ratio) check in Etabs
Replies
0
Views
795
Stockton2008
Stockton2008
H
  • Question
Etabs Load case Question
Replies
2
Views
1K
hkngrdk
H
Stockton2008
  • Locked
  • Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
1K
Luceid
Luceid
Angel Vila
  • Locked
  • Question
SEISMIC USER DEFINED LOAD
Replies
3
Views
3K
sticksandtriangles
sticksandtriangles
sriharsha.g
  • Locked
  • Question
General wall hinges are not modelled in links and will be linear for FNA load cases
Replies
0
Views
835
sriharsha.g
sriharsha.g

Part and Inventory Search

Sponsor

Back
Top Bottom