Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Does HYSYS give viscosity errors blending heavy & light hydrocarbons?

Status
Not open for further replies.
PetroBob

PetroBob

Chemical
Dec 23, 2005
60
Hi folks

A HYSYS simulation for blending diluent and bitumen is showing lower kinematic viscosity in the dilbit than that actually measured in the field. Is this a typical error for HYSYS? (Ie is it normal for HYSYS to under-predict viscosity when blending light and heavy hydrocarbon liquids?)

Does anyone have any suggestions as to corrections I could make to the simulation to improve the accuracy of viscosity prediction?

Thanks!
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question
Getting properties for Light Lubrication Oil
Replies
1
Views
2K
horacio Torres
horacio Torres
AlejandraGuillen
  • Locked
  • Question
Simulación de equipos reales en Aspen Hysys
Replies
0
Views
748
AlejandraGuillen
AlejandraGuillen
Jack Nicholson
  • Locked
  • Question
Entering ppm concentration in ASPEN HYSYS
Replies
0
Views
802
Jack Nicholson
Jack Nicholson
chemiee
  • Locked
  • Question
Aspen Hysys - How to create an equilibrium curve ?
Replies
0
Views
3K
chemiee
chemiee
Riko_93
  • Locked
  • Question
Aspen Hysys V9- Latent heat calculation
Replies
0
Views
704
Riko_93
Riko_93

Part and Inventory Search

Sponsor

Back
Top Bottom