Dose anyone have the origional ugcolor_nx7.cdf? 1

[cadmantools]

Looking to get the origional ugcolor_nx7.cdf file for NX7 that has not been altered?

NX6.0.4.3 mp02, Windows XP 32-bit
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[JohnRBaker]

OK, attached is a copy of the default color palette from NX 7.0.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[cadmantools]

Is is the same as the NX6 cdf file?

NX6.0.4.3 mp02, Windows XP 32-bit
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[jerry1423]

As you just found out it is probably a good idea to keep a copy of the default color palette someplace - I learned that a long time ago.

 

[cadmantools]

We are not on NX7 yet but will be moving in the near future.

NX6.0.4.3 mp02, Windows XP 32-bit,Team Center 9.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[cadmantools]

This is a part file that I created to load the vairous color definitions to see how the color pallet changes.
I used this to write a program to change the current part from its color definition to any other selected color definition from UG16 through NX7.

NX6.0.4.3 mp02, Windows XP 32-bit,Team Center 9.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[uwam2ie]

@cadmantools
do you color your faces for surface finishing in cam?

 

[cadmantools]

Yes

NX6.0.4.3 mp02, Windows XP 32-bit,Team Center 9.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[uwam2ie]

into the V5 world?

 

[cadmantools]

see thread561-244752

NX6.0.4.3 mp02, Windows XP 32-bit,Team Center 9.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.