Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Double clicking drafting dimensions to alter text

Status
Not open for further replies.

Nylanfs

Automotive
Oct 23, 2007
5
We're switching from Creo 2, to 3 & 4 (depending on customer requirements) and one of the more annoying changes is it appears that they eliminated the function of being able to double click on the drafting dimension to alter or add to the text. Now you have to select the text and then select "dimension text" in the ribbon.

Has anyone found a work around to make this act the way it used to?

Paul Grosse, Mechanical Designer
Holbert Engineering Co.
750 S. Chapin St.
South Bend, IN 46601
 
Replies continue below

Recommended for you

Sorry, no solution. PTC makes the drafting worse and worse with every release. I still use Wildfire 4 when I can get away with it.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor