Ossareh1352
Structural
- Apr 3, 2008
- 13
Dear Friends
for your information we have two storage tanks in our plant as follows:
1- Double wall tank for C3(Propane)with volume of 50,000 m3 for each tank . the operation temp. is -42c.
2-Double wall tank for C4(Butane)with volume of 22,000 m3 for each tank . the operation temp. is -8c.
At basic stage these two tanks have been proposed to make by (Steel+steel), it means that inner and outer wall making by steel.
But as you are well aware we have many storage tanks making by (Concrete+Steel)(inner wall by steel and outer wall by concrete).
I don't know what is the advantage and dis-advantage of selecting (Steel+steel) in compersion of (Concrete+steel).
I would be highly appreciated if can refer me to any paper or let me know your opinion in this regard.
for your information we have two storage tanks in our plant as follows:
1- Double wall tank for C3(Propane)with volume of 50,000 m3 for each tank . the operation temp. is -42c.
2-Double wall tank for C4(Butane)with volume of 22,000 m3 for each tank . the operation temp. is -8c.
At basic stage these two tanks have been proposed to make by (Steel+steel), it means that inner and outer wall making by steel.
But as you are well aware we have many storage tanks making by (Concrete+Steel)(inner wall by steel and outer wall by concrete).
I don't know what is the advantage and dis-advantage of selecting (Steel+steel) in compersion of (Concrete+steel).
I would be highly appreciated if can refer me to any paper or let me know your opinion in this regard.
