Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Double Wall Tanks

Status
Not open for further replies.

napster385

Petroleum
Apr 4, 2013
34
0
0
PH
Hi Everyone,

Is there provision on the standards like NFPA,API or UL that permits fabrication of double wall tanks in lieu to construction of bundwall or containment wall in a tank farm?

Tank is aboveground, horizontal with 55,000 liters capacity.

Appreciate your comments.

Thanks
 
Replies continue below

Recommended for you

The API/UL/NFPA tank standards address secondary containment and leak detection to a limited extent, but generally don't say when you need it.
That is addressed by federal standards and by local building and fire codes, which will reference NFPA 30 and/or the Uniform Fire Code.
From the bund/liter terminology, I assume you are likely not in the US, and would need to research local requirements in your area.
 
Status
Not open for further replies.
Back
Top