Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Double Web Beam- AISC Specifications

Status
Not open for further replies.

jkaab5

Structural
Jun 24, 2014
1
Solving for the shear strength Vn of a beam with two webs, should the web thickness be doubled because of two webs when performing h/tw?
 
Replies continue below

Recommended for you

O divide the shear load by 2. Is this an HSS tube section?

Mike McCann
MMC Engineering

 
No. The h/tw check is a buckling check, so you should use the thickness of one web.

When figuring the total shear area, you should use two web thicknesses.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor