Sep 28, 2005 #1 chancey Mechanical Aug 1, 2001 110 Is anyone familiar with a standard that covers the use of Dowel Pin Symbols in drawings? Thanks in advance
Is anyone familiar with a standard that covers the use of Dowel Pin Symbols in drawings? Thanks in advance
Sep 28, 2005 #2 Heckler Mechanical Apr 2, 2004 1,932 ASME Y14.100 Engineering Drawing Practices should cover dowel pin symbols in drawings. Best Regards, Heckler Sr. Mechanical Engineer SW2005 SP 4.0 & Pro/E 2001 Dell Precision 370 P4 3.6 GHz, 1GB RAM XP Pro SP2.0 NIVIDA Quadro FX 1400 o _`\(,_ (_)/ (_) Just because I'm paranoid doesn't mean that they aren't out to get me. - Woody Allen Upvote 0 Downvote
ASME Y14.100 Engineering Drawing Practices should cover dowel pin symbols in drawings. Best Regards, Heckler Sr. Mechanical Engineer SW2005 SP 4.0 & Pro/E 2001 Dell Precision 370 P4 3.6 GHz, 1GB RAM XP Pro SP2.0 NIVIDA Quadro FX 1400 o _`\(,_ (_)/ (_) Just because I'm paranoid doesn't mean that they aren't out to get me. - Woody Allen
Oct 1, 2005 #3 Guest0527211403 Mechanical Apr 24, 2004 1,125 Think "BMW symbol" That's what students in my drafting class refer to it as. ---------- "By all means, do not use a hammer." (1925 IBM Maintenance Manual) Upvote 0 Downvote
Think "BMW symbol" That's what students in my drafting class refer to it as. ---------- "By all means, do not use a hammer." (1925 IBM Maintenance Manual)
Oct 3, 2005 #4 GunT Mechanical May 29, 2005 79 SW gives two different orientations for Dowel Pin Symbol. Do the two orientations have any specific meaning attached to each one of them? Thanks in advance Upvote 0 Downvote
SW gives two different orientations for Dowel Pin Symbol. Do the two orientations have any specific meaning attached to each one of them? Thanks in advance
