Drafting Standards

[wes616]

Hi All,

I know that the basics of this question have been asked a thousand times on here, as I have done a number of searches and read lots...

set up a new environment, login in admin mode, etc etc.

So here is my question. I'm having a hell of a time actually manipulating the information in the standards menus to make my drafting standards look the way i need to deliver them to my client...

For instance, a diameter needs to show up with a bent leader at the center of the font line... or my section arrows need to be two short bent arrows, without a bisecting line... I just cant seem to find how to manipulate this data to get what i need.

it's late and i hope that this crazy question makes sense... i guess I can clarify when i wake up if this is just a bunch of rambeling junk...

Thanks for any help...

Wes C.
------------------------------
Light travels faster than sound. That's why some people appear bright until you hear them speak.

 

[itsmyjob]

If your client use V5, ask him to give you the standard file...

there is a place hidden in the online doc about the parameter of the standard file... hope that someone could post the link here.

Eric N.
indocti discant et ament meminisse periti ​

 

[5050t]

.../catdoc/doc_v5r14/English/online/basil_C2/basilat0401.htm

.../catdoc/doc_v5r14/English/online/basil_C2/basilat0402.htm

 

[itsmyjob]

thanks Peter !

Eric N.
indocti discant et ament meminisse periti ​

 

[itsmyjob]

but i was thinking about the part where they explain all parameters in th standard file...

you did not think i was going to give you a star for the wrong like...

Eric N.
indocti discant et ament meminisse periti ​

 

[catiajim]

.../online/driug_C2/driugsa0600.htm and it's sub-pages

 

[itsmyjob]

ok I trust Jim for that link but it does not work for R16...

This one does :

.../online/cfyugdr_C2/cfyugdrsa0600.htm

Eric N.
indocti discant et ament meminisse periti ​