Drawing View 1

[Joeseph55]

Hello All,

Thank you in advance. I'm having some trouble drawing the attached drawing. I was able with no problem to draw the top, but the bottom/underneath is what I'm having trouble seeing. Can someone please help me with this. Maybe I'm looking at it wrong or something. (the dashed lines are my main issues)

BR

Kenjg

 

[JMirisola]

There appears to be missing information. Specifically the hole types and sizes. Also, my suspicion is the dashed lines are hidden entities, but having the complete drawing would probably answer that.
As for the how, I would create the rectangle and extrude it the 5mm. I would then create a sketch for the 5 cutouts and create them. Bear in mind that you can use a sketch in multiple features.
After that I would create the hole features.

Jeff Mirisola, CSWE
My Blog

 

[Joeseph55]

Hello Jeff,

Thank you for your reply. Sorry for the late response. I was able to complete the top side of the drawing. It's ALL the dashed lines on the bottom I'm having trouble deciphering. I just can't see what it is that needs to be done.

One way or another I'll figure it out.

BR
Ken

 

[EEnd]

That drawing is done with first-angle projection. If you are used to third-angle projection, that could explain your difficulty in interpreting what is occurring on the bottom side.

[URL unfurl="true"]http://en.wikipedia.org/wiki/Multiview_orthographic_projection[/url]

Eric