DRAWINGS- DIMS DON'T COME FROM MODEL

[ETWHEEL]

SW04
WHEN I CREAT A 3VIEW DWG FROM A MODEL I DO NOT GET DIMENTIONS TRANS FERED OF DISPLAYED HOW DO I FIX THIS. IT HAPPENED AFTER UP TO 04. I CAN MANUALLY ADD WITH DIMENTION TOOL BUT THIS IS SLOW.

THANKS FOR HELP

 

[TheTick]

Have you tried inserting the dimensions using "Insert --> Model items..."?

"Great ideas need landing gear as well as wings."--C. D. Jackson

 

[TheTick]

I've noticed this issue coming up more frequently lately. I haven't been able to replicate the problem, though (all works fine by me).

Could you provide some details about your environment, OS, hardware, graphics card, processor, etc.

 

[Roller1]

Have you tried this?:
Go to Tools, Options, Document properties, detailing.
Under 'Auto Insert on view creation' select 'Dimensions marked for drawing.

If this works save it in your drawing template file.

Roller1

 

[SBaugh]

Make sure your Dims in your part have "marked for drawing" checked. THen do a Insert\Model Items\Dimensions\Marked for drawing.

Otherwise Roller1 is correct for auto insert of Dims. but you still have to have the dims in your part "marked for drawing" checked.

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376