Dec 30, 2010 #1 SAYATTIA Structural Jun 23, 2010 20 0 0 SA GENTLEMEN: HOW TO CONSIDER SLAB WITH DEFERENT LEVELS ( DROP IN SLAB LEVELS) IN SAFE MODELING
Jan 8, 2011 #2 handex Structural Jul 1, 2010 56 0 0 AU click on the slab you wish to offset and go to assign-->slab--->offset Upvote 0 Downvote
Apr 10, 2011 #3 Mosallam1982 Structural Jun 27, 2010 1 0 0 BH In addition to the step mentioned by handex you have to do also release to the slab edge. select the slab then go to assign-->slab-->edge release Upvote 0 Downvote
In addition to the step mentioned by handex you have to do also release to the slab edge. select the slab then go to assign-->slab-->edge release
Sep 23, 2011 #4 e104909 Civil/Environmental Aug 13, 2011 65 0 0 US I dont think it is as easy as that. You have to release only 1 edge of the slab that has a drop but not slab release. You have to make use of line release instead Regards, E104909 Upvote 0 Downvote
I dont think it is as easy as that. You have to release only 1 edge of the slab that has a drop but not slab release. You have to make use of line release instead Regards, E104909