Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dropped Object Analysis - Veritec
- Thread starter DRex
- Start date
Sorry cant help you there but the papaer at this location has a procedure for estimating loads on buried pipe subject to dropped loads. Hope this helps.
DRex,
For the report you are looking for, you may have contact Vetitas themselves. Other related references are DnV Guideline 14.5, "pipeline - trawler interaction" also check the OTC listing on the subject, there are several papers, offhand I do not have the references.
Narendranath R
Pipeline engineering is made easy with state of the art computer software, visit
For the report you are looking for, you may have contact Vetitas themselves. Other related references are DnV Guideline 14.5, "pipeline - trawler interaction" also check the OTC listing on the subject, there are several papers, offhand I do not have the references.
Narendranath R
Pipeline engineering is made easy with state of the art computer software, visit
Web site:
I tried a search without finding the document, but I found other documents which might be interesting and with references to this dnv/veritas/veritec report
Veritas Offshore Technology and Services A/S (VERITEC). "Design guidance for offshore steel struc-
tures exposed to accidental loads". Report No. 88-3172, August 1988.
The papers:
Hope this helps
Regards
Mogens
I tried a search without finding the document, but I found other documents which might be interesting and with references to this dnv/veritas/veritec report
Veritas Offshore Technology and Services A/S (VERITEC). "Design guidance for offshore steel struc-
tures exposed to accidental loads". Report No. 88-3172, August 1988.
The papers:
Hope this helps
Regards
Mogens
- Status
Similar threads
- Locked
- Question