Dry air or Nitrogen purging of MV Cable

[BJC]

Does anyone have a reference to purging the conductors of medium voltage cable? Usually involves dry nitrogen, desicants, etc. I have at least one reference at home but am not there at the moment.
I am googling and will continue. I have searched this group as well but must be using the wrong words because I thought there was a thread on it not to long ago.
Kerite and/or Rome had some info on it but there gone now.
If anyone knows of one thank you, I'll keep looking.

Thanks
BJC

 

[Zogzog]

What info are you looking for specifically?

 

[BJC]

The info I was looking for had the details of the set-up. Regualtor, connection to the cable via tubing and shrink tube. At the exit end there was a desicant in a bottle. The desicant turned blue when moisture was present. From the desicant the flow went to a flow indicator.
I can remember most of the details, I wanted to be sure of pressure settings and time after the desicant indicated there was no more moisture in the cable.
Thanks
BJC PE

 

[magoo2]

You might contact Carlos Katz with CTL. He did some fundamental work on this 10+ years ago.

 

[magoo2]

Katz is with Cable Technologies Lab in New Jersey.