Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dual band microstrip feedline.

Status
Not open for further replies.

gkuma

Electrical
Dec 3, 2010
12
Hey I have a question about designing a feedline for a dual band antenna. I have a 2.4, 5.8GHz antenna attached to a ground plane and was wondering how you guys would design a 50ohm feedline. I did it the way I was taught but am getting varied differences between simulation and tests. Wondering if it might be the feedline. Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor