Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DWG of safety snap hook

Status
Not open for further replies.

IFRs

Petroleum
Nov 22, 2002
4,667
I've looked all around the failed to find a DWG of the safety snap hook at the end of a lanyard or safety line. Anyone have one they might share, or suggest a site I many have missed?
 
Replies continue below

Recommended for you

There are a few sites that I've had success pulling from, but I've never been a big fan of cross posting sites and then having someone run into a horrible experience (I pointed someone to a website that unbeknownst to me, had recently been compromised, and caused all sorts of fun. Still felt bad for pointing anyone there, even though there was no way I could have known)

That said, I found a couple different safety hooks, not sure which design you're looking for... more of a hook with a folded sheet metal tab, or more of a caribiner profile?

My apoloies if you've already checked these, I am guessing you've done a much more in-depth search than me, but on the off chance that gogle was misbehaving, oddball search limitations from your ISP, etc...

Biners would be the easiest, those even show up on Thingi....

When I checked for "safety hook 3d" a number came up, different designs... trace and turbo I believe I've used before for various downloads, some of the other sites are a bit more finicky, or have you upload 20 before they let you download one, etc. Depending on which style you're looking for, I might have something from an old catalog CD that I got from somewhere... (I don't remember where it's from, I'd have to look... a bunch of off the wall items on there as well.)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor