Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Eccobond 285 Properties? 1

Status
Not open for further replies.

kan123

Mechanical
May 30, 2002
84
US
I am looking for mechanical properties of Eccobond 285 by Henkel (formerly Emerson & Cuming). The Technical Data sheet only has density and lap shear strength. I need to have Modulus of Elasticity at least. Ultimately, I would like to investigate stress relaxation if those properties are also available.

 
Replies continue below

Recommended for you

Several years ago I was told by E&C that the eccobond 285 was "almost identical" to stycast 2850 and I have used E = 1E8 Pa. The 285 has good thermal properties since TCE is 29E-6/C. We do not use it for strenght at hi temp of 95C but it is stable. Us the 23 or 24/lv catalyst for wide temperature range.
 
Thanks jedward. At least this fills in one of the "tbd" items from the vendor data sheet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top