Edit parameter of created datum plan

[velto]

Hi All
Happy new year every one in the forum. I have question about change parameter of datum plan on NX5. On NX3 I can change easy parameter of datum plane, which has just created eg. distance from origin plan. But on NX5 when I press Edit parameter I see only Fix? Could you explain to me that. Thank you very much.
Velto

 

[JohnRBaker]

Not sure what you're talking about as I have no problem editing an offset Datum Plane, whether it was created in NX 3 and opened in NX 5 or if it were created in NX 5 from scratch.


John R. Baker, P.E.
Product 'Evangelist'
NX Design
Siemens PLM Software Inc.
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

 

[phillpd]

Have you inadvertently "converted" it to a Fixed Datum Plane ?

Specialty Engineered Automation (SEA)

http://www.sea4ug.com

a UGS Foundation Partner

 

[velto]

Sorry, My mistake. You are right, I have converted it to a Fixed Datum Plane. Thank you for your help Phillpd and John
Velto