Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

editing multi-operations

Status
Not open for further replies.
spottydot

spottydot

Aerospace
Apr 21, 2004
36
IS THERE A WAY TO CHANGE THE COMMON PARAMETER IN THE NC OPERATIONS. I HAVE ABOUT 200 HOLES THAT ARE NOT NORMAL TO THE SURFACE AND I HAVE A DIFFERENT OPERATION FOR EACH HOLE AND WOULD LIKE TO CHANGE THE DEPTH AND PECK OF EACH HOLE. IS THERE A THERE A WAY TO CHANGE THEM ALL AT ONCE.
 
Status
Not open for further replies.

Similar threads

multicaduser
  • Locked
  • Question
errors in editing
Replies
6
Views
298
multicaduser
multicaduser
AspirineCD
  • Question
Changing configuration files for hole operations
Replies
1
Views
258
AspirineCD
AspirineCD
Franklin M.
  • Locked
  • Question
Operations reordered and shifted around
Replies
0
Views
57
Franklin M.
Franklin M.
nxexplorer
  • Locked
  • Question
OWI with with mom_parent_group_name as merged cell for collecting many operations
Replies
0
Views
68
nxexplorer
nxexplorer
gergs
  • Locked
  • Question
Hello all, I am editing some PMI
Replies
2
Views
104
jerry1423
jerry1423

Part and Inventory Search

Sponsor

Back
Top Bottom