Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EDM hole drilling

Status
Not open for further replies.

aleksandar81

Mechanical
Jul 2, 2014
137
I have 2 rows of holes (D=1mm) to drill 23 in first and 19 in the second. Holes are angled with respect to part surfaces. Depth of holes is coupled mm.Is it better to drill row by row (and witch one first) or at the same time bout rows. Electrodes are copper.
 
Replies continue below

Recommended for you

Hmmmm, 42 holes. No pattern needed. I've always done it willy-nilly.....[dazed]

Proud Member of the Reality-Based Community..

[green]To the Toolmaker, your nice little cartoon drawing of your glass looks cool, but your solid model sucks. Do you want me to fix it, or are you going to take all week to get it back to me so I can get some work done?[/green]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor