OK, what did I do wrong? I installed eDrawings after SW2003 was installed. Now when I go to animate or publish an eDrawing I get a blank screen but I do get the 3d icon. I uninstalled/installed eDrawings several times with no luck. I'm sure I'm overlooking something simple. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
eDRAWINGS integration
- Thread starter werks
- Start date
I had similar problem.
SW2003 requires newer version of eDrawing. Get eDrawing 2003 +SP03.
Another thing I would like to mention is that check "Use software OpenGL" of eDrawing Options if the program crushes. There might be a glitch with your video card.
SW2003 requires newer version of eDrawing. Get eDrawing 2003 +SP03.
Another thing I would like to mention is that check "Use software OpenGL" of eDrawing Options if the program crushes. There might be a glitch with your video card.
- Thread starter
- #3
- Thread starter
- #4
Maybe that will fix the issue I have with eDrawings. It will not launch from inside SW. But if I pop up the desktop and launch from there, I can then use it to my heart's content inside SW. Only two of our 20 or so systems do this (not may people use eDrawings here - I snuck round and tested them all).
It works fine at home on an older graphics card. All the versions are correct.
3/4 of all the Spam produced goes to Hawaii - shame that's not true of SPAM also.......
It works fine at home on an older graphics card. All the versions are correct.
3/4 of all the Spam produced goes to Hawaii - shame that's not true of SPAM also.......
- Status
Similar threads
- Locked
- Question