Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EEG measurement 1

Status
Not open for further replies.

venom

Computer
Jun 22, 2004
3
Anybody know a way of collecting EEG signals without using electrodes attached to the head??
 
Replies continue below

Recommended for you

The MEG or magneto-encephalogram does that. Uses an array of supercooled magnetic pickups to measure brain electrical activity not only at the surface, but at depth.

Dspdad
 
It is possible to detect biopotential signals without body contact. A paper by R J Prance et al (2000 Meas. Sci. Technol. 11 291-297, "An ultra-low-noise electrical-potential probe for human-body scanning") describes "a very-low-noise, high-input-impedance probe developed to make non-contact measurements of electrical potentials generated by currents flowing in the human body. With a noise level of 2 µV Hz-1/2 at 1 Hz, down to 0.1 µV Hz-1/2 at 1 kHz, and an operational bandwidth from 0.01 Hz to 100 KHz..."

I have provided links to the papers (and circuit diagrams) that are available online at:


Best Regards,

David
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor