One of our HDS units is planning on routing their stripper overhead liquid to the crude unit top pumparound (@ the suction of the pump). I would have prefered to route the stream to the slop tank. However, the stream would then back out crude from the crude unit. The stream is at 100F and it will be ~5% of the current pumparound rate. Could anyone see an imminent problem with this arrangement? ANy help is appreciated.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Effect of adding external stream to Crd Twr pumparound
- Thread starter lgmarti
- Start date
Similar threads
- Locked
- Question
- Locked
- Question