Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EHV cable directly buried

Status
Not open for further replies.

cesgibis

Electrical
Joined
Jan 21, 2003
Messages
26
Location
BH
HI, I am trying to specify the installation of a 132 kV XLPE cable to be buried directly in the ground.
Can anyone give me information about the method of laying, type of backfill, size of trench (depth, width) , laying arrangment, bonding, etc....
I will have also to lay in the same trench a fiber optic cable, a control cable and earth cable. Is there a minimum distance to be respected from the 132kV cable ?

I would appreciate any additional technical information or internet site address.

THank you
 
Question: Are you aware of rodents, chemicals, etc.?
 
We are only specifying the cable with a lead sheath and an insect protection (termites).
No specific chemical hazard has been identified on site.
NOte : THe cable is intended to connect a cogenration step-up transformer to a 132 kV switchyard.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top