Electric Motor

[mahsa9707]

Hi There,

I am working on a project that needs high power, fast, light-weight actuator. I used low impact linear solenoid to do the job, but the force that I could get from it compare to its stroke length and weight is not enough. What I need is an actuator with 100 N force and less than 100g weight, also the response time should be less than 50ms. Do you guys have any solution for this problem?

 

[itsmoked]

100g?!

Piezoelectric stack.

Keith Cress
kcress -

http://www.flaminsystems.com

 

[waross]

Bill
--------------------
"Why not the best?"
Jimmy Carter

 

[itsmoked]

Gas generator! Nice idea.

Keith Cress
kcress -

http://www.flaminsystems.com

 

[jraef]

Linear motor? You don’t say the stroke length. Despite the rhetoric, stroke length matters...


" We are all here on earth to help others; what on earth the others are here for I don't know." -- W. H. Auden

 

[Tmoose]

OP Mahsa has not been back since July 4th, the day she joined and logged in one time.

I'm thinking that is because on the evening of July 4th a prepaid Purchase Order for $250 was issued to Alibaba for "motor, high power, fast, 100g . 100 N force , 100g . Response time less than 50ms."

 

[itsmoked]

Gads! I suspect you're right Shurlock.

Keith Cress
kcress -

http://www.flaminsystems.com

 

[waross]

I suggested a solution that was dangerous had a stroke length up to one mile or more. grin.

Bill
--------------------
"Why not the best?"
Jimmy Carter