Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Electric Service/Life Cycle

Status
Not open for further replies.

jpclmsa

Mechanical
Jul 30, 2002
7
0
0
PT
Does anyone know what do the IEEE code issues says about electrical equipments Service/Life Cycle (power transformers, electrical switchboards, cos fi correction batteries, protections, etc)?
 
Replies continue below

Recommended for you

Search for the following keywords: Electrical and thermal stresses reliability, insulation aging, loss of life, effect of over loading, Arrhenius Model, etc.

Power Equipment: Transformer, motors, breakers, etc.

The following institutions are good source of information:

1- USA: IEEE, EPRI, NEMA,EEI, BPA, LAWD, TVA, NASA

2- Institution abroad: GIGRE, IEC, IEE

3- Manufacturers: GE, ABB, Alstom, Siemens

4- Recommended Standard references:

IEEE Std 101-1987: IEEE Guide for the Statistical Analysis of Thermal Life Test Data.

IEEE Std 99-1980 - IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electric Equipment

IEEE Std C57.91,92 & 115 : IEEE Guide for Loading Mineral-Oil-Immersed Transformers.

ANSI/IEEE C57.96-1989
An American National Standard IEEE Guide for Loading Dry Type Distribution and Power Transformers

IEEE 56-1977 IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10,000 kVA and Larger) 1977



 
Status
Not open for further replies.
Back
Top