Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electrical biased maintenance engineer

Status
Not open for further replies.

engeeneer

Specifier/Regulator
Sep 1, 2013
23
hello
I often read in ads the term 'electrical biased maintenance engineer'
what does 'electrical biased' exactly mean?
and how does a maintenance engineer become 'electrical biased'?
thanks!
 
Replies continue below

Recommended for you

As opposed to a mechanically-biased maintenance engineer. Someone who understands schematic diagrams, can troubleshoot power and/or PLC/SCADA type systems, etc.

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
I've always been the mechanically biased maintenance Engineer who wanted to work on electrical stuff with a 6-inch hammer wrench. The electrical guys with their teeny-tiny screw drivers and one-handed side cutters always made me smile.

David Simpson, PE
MuleShoe Engineering

"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor