Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Electrical construction drawing

Status
Not open for further replies.

anitharts

Electrical
Feb 1, 2024
6
0
0
ID
Is there any reference that can guide me to design electrical construction drawing such as section drawing of cable way support, conduit, or grounding layout. Basically, I don't have civil knowledge. So, it's difficult to me execute this type of document.
 
Replies continue below

Recommended for you

Your (local) National Electrical Code should have very clear-cut examples of what is (and is not) acceptable in your location.

Converting energy to motion for more than half a century
 
Yes, we have national electrical standard. But my problem is during engineering step, it is difficult to me to interpret it in detail drawing like detail electrical support.
 
For cable tray we have
NEMA Standards Publication VE 2-2013
Cable Tray Installation Guidelines
and manufacturer installation instructions. See B-Line, for instance.
For grounding-grounding rods and other see: ena energy network association Technical Specification 41-24

UNITED STATES DEPARTMENT OF AGRICULTURE REA BULLETIN 1751F-802

ERICO Facility Electrical Protection Division Grounding Products and Systems


 
Status
Not open for further replies.
Back
Top