Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electrical contactor

Status
Not open for further replies.

mehtech

Electrical
Nov 23, 2004
4
contactor use for motor control operation (starting and stoping)
 
Replies continue below

Recommended for you

Definitely.

"Venditori de oleum-vipera non vigere excordis populi"


 
You would need a electric power source, of course, not a horse(power)

Sorry, couldn't resist :)

Wheels within wheels / In a spiral array
A pattern so grand / And complex
Time after time / We lose sight of the way
Our causes can't see / Their effects.

 
use a horse power rated contactor that is part of a motor starter. These types have provisions for overload devices. if you don't understand any of this techono- babel then take a couse on motor control. welcome to the world of electrical controls.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor