Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electrical engineering

Status
Not open for further replies.

dudebazooka

Industrial
Oct 17, 2002
1
how to connect a 5" copper cadmium electrical line to a 5" copper magnesium line with 600 volts and 4000 amps running through it
 
Replies continue below

Recommended for you

I'm assuming the connection will need to be insulated correct? In what type of environment do these electrical lines exist (ie. Wet/dry, tempurature)?



Respectfully,

------------------------------------------------------------------------
If it is broken, fix it. If it isn't broken, I'll soon fix that.
 
Five inches. Bar,cable, round conductor? Is it the difference in material you are worried about?

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor