Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electro hydraulic turn over machine 10 ton capacity

Status
Not open for further replies.

atvargas

Industrial
Feb 24, 2003
9
I need to choose a turn over (upside - down) machine to turn a mould over 90° from upside position to down or down to upside. Muold weight is about 7 ton.
I´m using to do this operation with a 30/5 ton overhead crane but there is a risk in this manner due to 5 ton hook maybe is handling more than nominal capacity 5 ton when the mould is turned over.

Can you recommend any brand of machine to do this?

Thanks a lot
atvargas
 
Replies continue below

Recommended for you

well I have seen things like this in New Zealand but I don't know the brand or name. However it should be easy enough to design and build a machine... I know it is the hard way but some time the hard way is the only way.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor