Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electronic fuel injection -fuel pumps and regulators

Status
Not open for further replies.

krob

Automotive
Jun 5, 2003
1
Am searching for an oem pump and regulator that will supply fuel at 70psi. Has to have sufficient volume to provide enough fuel for a 300hp 4 cyl, 1390cc 4-stroke top rev limit at 13,800. I know a business associate that says such a pump and regulator set exists and that Bosch is the manufacturer. He refuses to tell me the part numbers, and instead wants to sell them to me for a very steep price. I have not been able to isolate a Bosch catalog or source. Basically running into dead ends everywhere I turn. Does anyone know of how I can source this equipment? Any help will be much appreciated.
 
Replies continue below

Recommended for you

) Bosch High Pressure Pump 0-580-254-984

Rated at 44 GPH @ 90 PSI 750+ Hp This pump is identical to the Accel part number 74702 which they boast will handle 870 Hp!


Was my very first hit with a search engine. We don't mind helping people but...

Cheers

Greg Locock
 
Hello Greg,

What search engine do you use? I went to the Bosch website and couldn't find any technical data.

Thanks,
John Woodward
 
what kind of specific vehicle and motor is it going in?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor