Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

embankment construction

Status
Not open for further replies.

Robbo100

Civil/Environmental
Jul 6, 2010
4
I have a contractor who insists that he can construct a small dam wall with a scraper. The specification calls for screening out material larger than 75mm - for obvious reasons.

The contractor insists that he can use a scraper to run out rocks bigger than 75mm diameter.

How feasible is this?
 
Replies continue below

Recommended for you

I'd be rather surprised if he could. How would he do that?

What do you mean by a "dam wall"? I don't think I recognize that term.
 
dgillette,
In some countries, they call the dam the "dam wall", and they call the impoundment the "dam". I don't know where Robbo is located, but in Australia ponds, reservoirs, etc. are often called dams.
 
If he also has a crew of laborers walking behind the scraper, picking rocks than he's good to go.
 
If you were talking more like 150mm, then more feasible. 75mm is a bit small, and he would have to drop a very thin lift.
 
I am in Australia. Let's call it a sludge lagoon to be more precise.

But this is about what we figured. Thanks guys
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor