EMC testings 1

[Morcego]

Hello,
I'm completly new to CE mark.My company is located in Europe, and I produce several electronic equipment, with maximum supply voltage of 24V DC. It falls under the EMC directive only, so I was told.

My questions:
Can I test my equipments in a non notified body, and do a self certification (based o the test results)? or must use a notified body?

Does anybody know a company that conducts such tests without charging to much? My company is very small, and I only sell less than 100 units a year of each product, so paying thousands of euros for each test is out of the question.

Thanks

 

[dbaird]

We are in the USA and have used these people but they have offices in Europe. I would contact them and asked the same questions.

http://www.techintl.com

David Baird

Sr Controls Designer
EET degree.
Journeyman Electrician.

 

[micalbrch]

Try that link. It gives you names of laboratories and notified bodies in different European countries. No idea who is cheap and who is expensive but at least some addresses.

http://www.we-online.de/web/en/emc/more_than_you_expect_2/messlabore/Messlabore_Konfigurator.php

 

[Morcego]

Thanks Dbaird and micalbrch.
300+ Labs in Europe alone!! I have to type a lot...

M.