Feb 10, 2008 #1 EMDGuy Marine/Ocean Feb 10, 2008 1 Does anyone have any tips on removing a 567C water pump impeller without using an impeller puller?
Feb 11, 2008 #2 chief Marine/Ocean Dec 30, 1999 276 Try some heating with a gas torch on the impeller center area and immediately afterward use a cold water shock on the shaft. Should break it loose. Probably been Loctited originally. Offshore Engineering&Design Upvote 0 Downvote
Try some heating with a gas torch on the impeller center area and immediately afterward use a cold water shock on the shaft. Should break it loose. Probably been Loctited originally. Offshore Engineering&Design
