JohnnyRunner
Mechanical
Does anybody know whats the endurance limit of ABS? Couldnt find any useful information online
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Endurance limit of ABS gears!!!
- Thread starter JohnnyRunner
- Start date
- Status
Not much. It's a useless bearing material. Gears are usually made from POM or polyester.
www.tynevalleyplastics.co.uk
Politicians like to panic, they need activity. It is their substitute for achievement.
www.tynevalleyplastics.co.uk
Politicians like to panic, they need activity. It is their substitute for achievement.
Pud is (of course) correct. Also worth mentioning that ABS is not one well-defined material. It is SAN (of various types) filled with various amounts of polybutadience rubber particles of various sizes. Some grades contain a lot of left other surfactant and others do not. All the parameters affect performance.
Chris DeArmitt PhD FRSC
President
Plastic materials consultant to the Fortune 100
Chris DeArmitt PhD FRSC
President
Plastic materials consultant to the Fortune 100
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question