Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

EPDM Material data for ansys workbench 13

Status
Not open for further replies.
SteveyB

SteveyB

Petroleum
Joined
Nov 27, 2011
Messages
47
Location
GB
Hi All,

I was wondering if someone could help me with my dilema. I am after some material data for a 70 shore hardness EPDM rubber,to run a 3d analysis of a seal in ansys workbench. I realise that many factors effect the input data but I am just trying too obtain a rough estimate of the seals behaviour and compression forces. If anyone could help it would be grately appreciated as I am having difficultly obtaining this.

Thanks
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top