marcofa
Mechanical
- Sep 18, 2008
- 47
I imported many dxf files to Catdrawing without problems.
Now appens that when dxf part are small and have dimension less than 30- 40 mm, the imported Catdrawing is always oversized with 25,4 scale; i.e. washer 25 mm diam in dxf result as 635 mm diam in Catdrawing after import.
This is very annoing.
Thank for help
Marco
Now appens that when dxf part are small and have dimension less than 30- 40 mm, the imported Catdrawing is always oversized with 25,4 scale; i.e. washer 25 mm diam in dxf result as 635 mm diam in Catdrawing after import.
This is very annoing.
Thank for help
Marco