Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error in constraints

Status
Not open for further replies.
Sri21

Sri21

Mechanical
Joined
Apr 5, 2014
Messages
12
Location
US
Hi

the selected entity was created by an assembly level feature. For the model to generate properly apply all constraints before creating the assembly level feature error in abaqus. What does that error mean. I am trying to align the parts in assembly but not able to due to the error message.

Thank you
 
Status
Not open for further replies.

Similar threads

jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
692
FEA way
FEA way
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
S
  • Locked
Error in Abaqus Am Modeler Event Series
Replies
3
Views
3K
FEA way
FEA way
Vishakh_Rajendran
  • Question Question
XFEM 'Mapping' error
Replies
4
Views
5K
Vishakh_Rajendran
Vishakh_Rajendran

Part and Inventory Search

Sponsor

Back
Top