Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error: "NO. of Multi-Base Curve is Zero" in SolidWorks Simulation

Status
Not open for further replies.
gittenlucky

gittenlucky

Aerospace
Sep 11, 2012
1
I am trying to do a simulation that is giving me a lot of problems. I have simplified my model down to a single piece and it is still not running for me. I have a single part that I apply a base excitation to and it give me an error "NO. of Multi-Base Curve is Zero". I have done some searches, but I can't find any information on this error. My base excitation is a sinusoid of 1" amplitude at 1 Hz for 1 second. Any help would be greatly appreciated.
 
Status
Not open for further replies.

Similar threads

IdanPV
  • Locked
  • Question
Apply Moments in Solidworks Simulation
Replies
2
Views
1K
IdanPV
IdanPV
Joel_Lapointe
  • Locked
  • Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
A
  • Question
Flow simulation evaporative cooling
Replies
0
Views
762
arimaulanar
A
Joel_Lapointe
  • Locked
  • Question
Impose mesh coordinates multiple different simulations (SolidWorks Simulation)
Replies
2
Views
902
Joel_Lapointe
Joel_Lapointe
pllmoreau
  • Locked
  • Question
Solidworks Simulations Bearing Load error
Replies
4
Views
1K
pllmoreau
pllmoreau

Part and Inventory Search

Sponsor

Back
Top Bottom