Mar 4, 2008 #1 gohj New member Joined Sep 7, 2005 Messages 21 Location US In Autocad you could take a given PolyLine and divide it into 100 equal segments by using the divide Polyline. I can't find any comparable command for Solidworks that would allow me to divide a given Solidworks Spline. Is there a way to do this??
In Autocad you could take a given PolyLine and divide it into 100 equal segments by using the divide Polyline. I can't find any comparable command for Solidworks that would allow me to divide a given Solidworks Spline. Is there a way to do this??
Mar 4, 2008 1 #2 smcadman Mechanical Joined Nov 6, 2002 Messages 1,589 Location US Pick spline > Insert > Reference Geometry > Point. Pick the "Evenly Distribute" option on the bottom. Flores Upvote 0 Downvote
Pick spline > Insert > Reference Geometry > Point. Pick the "Evenly Distribute" option on the bottom. Flores
Mar 4, 2008 #3 CorBlimeyLimey Mechanical Joined Nov 5, 2003 Messages 15,292 Location CA Yes and no! No, you cannot simply divide a sketched spline into equal parts. Yes, you can use a spline as a path to pattern a feature using the Curve Driven Pattern function. Upvote 0 Downvote
Yes and no! No, you cannot simply divide a sketched spline into equal parts. Yes, you can use a spline as a path to pattern a feature using the Curve Driven Pattern function.
Mar 4, 2008 #4 smcadman Mechanical Joined Nov 6, 2002 Messages 1,589 Location US Actually my post above does work, but I forgot to mention that you have to exit the spline sketch to divide it evenly. Flores Upvote 0 Downvote
Actually my post above does work, but I forgot to mention that you have to exit the spline sketch to divide it evenly. Flores