Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Examples! 1

Status
Not open for further replies.

SBaugh

Mechanical
Mar 6, 2001
6,685
I have some examples if anyone is interested. Go to
This are some basic examples!

I hope this will some of you newbies out there! X-) Scott Baugh, CSWP :)
credence69@hotmail.com
 
Some really nice examples Scott!

by the way... either your wife is 3 feet tall or you have to duck under every doorway! saw the wedding photos and you have a darling young lady there! And MY!!! that baby has a full coat of hair LOL!

That golf was funny! I used the very same thing with a rather progressive class I taught when one envening i decided to show them a cool thing to do with revolves/revolve cuts and patterns... the one we made had formulas so that even if you changes the diameter of the ball, the dimples would remain proportional!! nice job, some interesting examples

ciao
jon
 
LOL Jon,

I have to duck under alot of doorways. You finally get to a point after you have knocked yourself unconscious more than twice. To just duck thru any doorway, no matter how big or small it is [rofl].

That Golf ball I made in under 15 mintues. It was a rush job since I was working on it during company time.[bomb]

Anyway, Thanks for the suggestions Sorin!! Sorin help me to organize my site better.

I have also added a Basketball to the list of things that any of you can DL. Scott Baugh, CSWP :)
credence69@REMOVEhotmail.com
 
Hello again Everyone [rainbow],

I haven't changed anything but the location and background of my webpage.
I have more room to make more examples. So if any of you can think of an Example that you would to see. Please let me know and I'll make the example and post it for everyone to DL.

Best Regards, Scott Baugh, CSWP :)
credence69@REMOVEhotmail.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor