Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Exhaust extensions

Status
Not open for further replies.

rtjn2

Mechanical
Oct 13, 2005
1
Has anybody any information or knowledge on long exhaust piping extensions?I have to install 3 x 1825 Kva diesel generators 7.5 metres below ground level with 100 metre exhaust extensions vertically through the centre service shaft in a new hotel project.
 
Replies continue below

Recommended for you

The engine manufacturer can tell you the exhaust gas temperature and flow rate, the allowable backpressure limit, and the load limit for the exhaust flange. Be sure to include flexible connections so the engines can dance around a bit, and supports for the pipe.

Silencers will eat a lot of your backpressure budget; get help selecting them from a silencer manufacturer.



Mike Halloran
Pembroke Pines, FL, USA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor