Export step and parasolid from command line

[claforet]

Hi,

Does anyone know how I can export a part file as a step and a parasolid from the command line. Basically I want to be able to convert all files in a given directory to step, parasolid and jt (I already have a batch file that does jt) automatically by running a bat file, but I have no idea how to get a parasolid and I don't know the proper commands to get the step exporter to work without going through the interface.

Thanks.

 

[jerry1423]

You can do what you want using the external translators that NX has.
To get there in Windows:
START > PROGRAMS > UGNX_ >TRANSLATORS > STEP203(or Whatever) > EXPORT

 

[claforet]

Thanks for the reply. I use that translator, but I wanted to convert to all three file types at once (I need to know how to run the step export utility at the command line, rather than through the GUI)

 

[PSI-CAD]

For parasolid, you can use the following command
ugii_base_dir\ugii\ug_inspect -extract_all mypart.prt

I hope this help

Regards

Didier

http://www.psi-cad.com